Aug 19, 2026 Leave a message

OEM ODM Service

Orthopedic Implants OEM

Orthopedic implants OEM is a contract manufacturing service purpose-built for medical device brands, hospitals, and distributors needing trauma, spine, and joint implants produced to exact specifications. We deliver high-precision, biocompatible solutions with ISO 9001 and CE certification, backed by 24 years of OEM/ODM experience and zero major quality incidents across 3 million+ clinical implantations.

[Company logo] | 24+ years · 50,000+ units/year · 20+ countries · 3M+ implants · 60% clients 5+ years

[Get a Quote] - engineering reply within 24 hours

Quality Risk in Outsourced Implants

Risk: A failed batch of implants leads to a product recall, costing an average of 2-5% of annual revenue, plus brand damage that takes years to repair. Root cause: insufficient process control in the manufacturing line. Impact: Loss of hospital contracts and distributor trust.

Risk: Inconsistent tolerances between production runs cause surgical complications - a femoral component that is 0.5 mm off can alter joint alignment. Root cause: lack of precision machining capability. Impact: Higher revision surgery rates and liability exposure.

Risk: Regulatory non-compliance delays market entry by 6-12 months. Root cause: missing certifications for target markets. Impact: Lost first-mover advantage and wasted R&D investment.

If you face any of these risks, our Orthopedic Implants OEM service was designed to eliminate them.

What Makes Fuxiang's OEM Service Different

Dimension

Our OEM Service

Industry Conventional

Differential Value

---

---

---

---

Defect rate

<0.1%

0.5-1%

5-10x lower reject rate - fewer recalls, less liability

Production capacity

50,000+ units/year

10,000-20,000 units/year

2.5-5x capacity - supports full system rollouts

Response time

24 hours to first reply

3-5 business days

Faster decision-making on prototyping and pricing

Regulatory coverage

ISO, CE, CFDA, FDA 510K

ISO or CE only

One partner covers more markets, including the US

Client retention

60% of clients 5+ years

Industry average 2-3 years

Proven reliability - partners stay, they don't churn

Clinical track record

3M+ implants, zero major incidents

Data rarely disclosed

Documented safety history you can verify

5-year partnership cost

Lower total cost with stable quality

Rework + vendor switching costs

Fewer audits, fewer changeovers, less risk

Our production line for a North American client produced a full knee system with annual volumes exceeding 50,000 units, verified per ISO 13485. The defect rate held below 0.1%. We hold ISO and CE certification, with some implants carrying FDA 510K clearance. We have served OEM/ODM clients for 24 years, and our quality standard often exceeds what clients find from US suppliers - one client told us, "your quality is better than some US supplier."

Manufacturing Process

· Raw material inspection → ASTM F136 / F67 → spectrometer analysis → composition verified

· CNC machining → 5-axis precision lathes → tolerances ±0.01 mm

· Surface treatment → ISO 5832 → anodizing / passivation per spec

· Final inspection → ISO 9001 → 100% dimensional + visual check

Core Components

Raw material: Medical-grade titanium (Ti6Al4V ELI) | ASTM F136 | Traceable mill certificates

Machining: 5-axis CNC centers | Germany + Japan origin | Sub-micron repeatability

Inspection: CMM (coordinate measuring machine) | Swiss origin | ±0.001 mm resolution

Quality Inspection

· Incoming inspection → ASTM F136 → chemical composition + mechanical properties verified

· In-process inspection → dimensional control → every 10 minutes per batch

· Final inspection → ISO 9001 → 100% of parts, visual + dimensional

· Batch traceability → Unique lot number → full history for 10 years

Defect rate: ≤0.1%. Third-party: SGS / TÜV / BV audits available on request.

Technical Specifications & Customization

Technical Specifications

Category

Parameter

Value

Standard

---

---

---

---

Dimensional

Tolerance

±0.01 mm

Custom

Dimensional

Surface roughness (Ra)

0.4 μm

ISO 5832

Dimensional

Length range

5–500 mm

Custom

Material

Titanium Grade

Ti6Al4V ELI

ASTM F136

Material

Stainless Steel Grade

316LVM

ASTM F138

Material

Cobalt-chrome Grade

CoCrMo

ASTM F1537

Mechanical

Tensile strength (Ti)

≥895 MPa

ASTM F136

Mechanical

Yield strength (Ti)

≥828 MPa

ASTM F136

Tensile strength of our titanium implants measures ≥895 MPa, achieved through controlled forging and heat treatment processes. We verify this per ASTM F136 using a universal testing machine. Batch test reports from 2023-2024 show values in the 950-980 MPa range, with SGS third-party verification available. This gives you a safety margin of 6-9% above the standard, reducing the risk of implant fatigue failure in load-bearing applications.

Customization Capability

Implant type: Trauma plates, spine systems, hip & knee replacements

Material options: Ti6Al4V ELI, 316LVM, CoCrMo, PEEK

Finishing: Polished, anodized, bead-blasted, custom marking

Packaging: Sterile or non-sterile, custom labeling per market

Customization Process

· Requirement confirmation → 2. Technical evaluation & DFM optimization → 3. Sample prototyping → 4. Mass production → 5. Final inspection & shipment

Applications

Industry

Typical Application

Recommended Spec

Operating Environment

---

---

---

---

Trauma

Fracture fixation plates, screws, nails

Ti6Al4V ELI, ±0.01 mm

Sterile OR, load-bearing

Spine

Pedicle screws, rods, cages

Ti6Al4V ELI, PEEK

Long-term implantation

Joint

Hip stems, knee femoral components

CoCrMo, Ti6Al4V

High-wear articulation

Instruments

Surgical guides, insertion tools

316LVM

Repeated autoclave cycles

Customer Cases

Orthopedic brand, North America · 50,000+ units/year full knee system · 3+ years · Defect rate below 0.1%, full regulatory file support

Distributor, Europe · Trauma plate line expansion · 18 months · Launched 3 new product lines under their own brand

Hospital group, Latin America · Spine implant supply · 2 years · Reduced procurement cost by 30% vs previous supplier

Customer Voice

"Your quality is better than some US supplier." - Client comment during routine quality audit

Usage: Independent assessment from a US-based client comparing our output to their prior domestic supplier.

FAQ

Q1: What certifications do your OEM implants hold?

A: Our implants hold ISO 9001 and CE certification across the full product range. Some implant systems carry FDA 510K clearance for the US market. We also hold CFDA certification for China. This lets you sell into Europe, North America, Asia, and Latin America without duplicating certification costs - one manufacturing partner covers multiple regulated markets.

Q2: What is the typical OEM lead time?

A: Standard lead time is 30-45 days from approved sample. Prototype samples take 15-20 days. We offer expedited production for urgent orders. Our annual capacity of 50,000+ units means we hold dedicated line slots for returning OEM partners - your production doesn't wait behind unrelated orders.

Q3: Do you require a minimum order quantity (MOQ)?

A: No. We accept orders from 1 unit for sample validation up to full system production volumes. This lets you test our quality and market response before committing to large quantities. Many clients start with small validation batches, then scale to 10,000+ unit annual programs once they confirm quality and deliverability.

Q4: Can you develop a new implant design from scratch?

A: Yes. We offer full ODM capability - from concept development and product design through prototyping, testing, and contract manufacturing. Our engineering team handles DFM optimization and regulatory file support. In 24 years we have moved over 50 product concepts from sketch to market for our clients.

Q5: How do you ensure traceability for each implant batch?

A: Every implant receives a unique lot number at incoming material stage. We track material certificate → machining records → surface treatment parameters → final inspection results in a single file, archived for 10 years. If any question arises about a specific batch up to a decade later, we can reproduce its complete manufacturing history in under 48 hours.

Q6: What are your pricing levels compared to US or European manufacturers?

A: Our pricing typically undercuts US and Western European manufacturers by 30-50% for equivalent quality. One US client stated our quality exceeds their previous domestic supplier. You pay for the manufacturing, not the overhead of a high-cost country - the same medical-grade titanium, same ASTM F136 standard, same final inspection rigor. Request our price list to run your own comparison.

Q7: Do you provide surgical technique training and workshop support?

A: Yes. We offer surgical technique training and workshops at our facility in China. We also coordinate sending experienced surgeons to demonstrate and support surgeries for our distributors. This is included as part of our long-term partnership program - we support you beyond the production line, all the way to the operating room.

Key Takeaways

Full OEM/ODM service for 24 years, ISO and CE certified, FDA 510K for select implants

Defect rate below 0.1%, verified across annual production of 50,000+ units

No MOQ - validate our quality before committing volume

24-hour response to every inquiry

3 million+ implants clinically placed with zero major incidents

60% of clients have partnered with us for 5+ years

After-Sales Service

Warranty: 24 months from shipment date

Technical response: within 24 hours

On-site support: within 72 hours (visa permitting)

Support channels: WhatsApp / Email / Online chat / Phone

Logistics & Delivery

Annual capacity: enough to implant 50,000+ joint patients per year

Standard lead time: 30-45 days

Expedited lead time: 20 days

Packaging: export-grade double-layer sterile barrier + moisture-proof carton

Sample policy: free samples available, 15-20 days delivery

Request a Quote

Required information:

Company name

Email

Product requirements (implant type, volume, certification target)

· RFQ quick form

· WhatsApp instant contact

· Technical consultation booking

· Resource download center

· Sample request

Response commitment: An engineer responds within 24 hours.

Current production slots for the next quarter are being allocated across our OEM partner programs.

Last updated: 2025-05-25

Send Inquiry

whatsapp

Phone

E-mail

Inquiry